16A Plug to 13A IP54 Socket 3 Pin 230V H07RN-F Adaptor Cable

Heavy Duty 16 Amp to 13 Amp 1 Gang IP54 Outdoor Socket 240V 3 Pin Mains Power Adaptor Convertor Leads

Assembled in the UK to the highest standard, these cables are suitable for all heavy duty domestic, industrial, machinery, engineering, welding, events, stage, marquee, catering, commercial, site power, workshop, and power distribution applications.

Made with the highest quality Nexans Titanex H07RN-F rubber cable, offering exceptional strength and flexibility even in the most demanding environments. 

IP44 waterproof rating for outdoor use. See our IP ratings page for more information. 

Fully tested, and supplied with 100mm of clear 2:1 heatshrink at each end for custom ID marking.

Features:

• Heavy Duty Adaptor: Heavy duty adaptor cable allowing a 13A UK 3 pin appliance to be connected to a 16A 230V 3 pin socket supply outlet. Ideal for industrial and engineering environments, as well as event power distribution requirements.
• Power Load Capacity: The load of the device connected to the 13A socket must not exceed 3000W.
• Premium Quality Construction: Made with high quality Nexans Titanex 1.5mm² H07RN-F rubber cable, PCE IEC 60309 blue 3 pin 2P+E commando plug and Masterplug UK 13A 1 gang IP54 outdoor rated socket.
• Compatibility Notice: Not compatible with 32A supply outlets which are visually similar but different in size, check your supply connection for 16A rating. Not recommend for use with EV chargers.
• UK Assembly and Compliance: Assembled in the UK to the highest standard, all leads are tested and serial numbered. Chemical, oil, and UV resistant. BS EN60309, UKCA, CE, and RoHS compliant.

Specifications:

• Cable: Nexans Titanex 3G1.5 1.5mm² 3 Core H07RN-F Rubber
• Plug: PCE 013-6 230V 16A 3 Pin 2P+E IP44 Blue Plug (Male)
• Socket: Permaplug IPS 230V 13A 3 Pin 1 Gang IP54 Orange Socket (Female) - Socket will accept a normal size 13A plug (not transformers or adaptor plugs), and the waterproof gland will accept a maximum of 1.5mm² cable flex. This is incompatible with most EV charger cables.
• Terminations: Ferruled
• Heatshrink: 2 x 100mm Clear 2:1 Heatshrink
• Voltage: 230V
• Amperage: 13A
• Wattage: 3000W
• IP Rating: IP44
• MPN: 16A-13A-IP-BLU

Our adaptors are for professional use only. Cable current ratings must be observed to avoid damage to connected supply or appliances. Ratings are determined by the lowest rated component. If you require advice please contact us.